Bank Reserves: Definition, Purpose, Types, and Requirements (2024)

What Are Bank Reserves?

Bank reserves are the cash minimums that financial institutions must have on hand in order to meet central bank requirements. This is real paper money that must be kept by the bank in a vault on-site or held in its account at the central bank. Cash reserves requirements are intended to ensure that every bank can meet any large and unexpected demand for withdrawals.

In the U.S., the Federal Reserve dictates the amount of cash, called the reserve ratio, that each bank must maintain. Historically, the reserve ratio has ranged from zero to 10% of bank deposits.

  • Bank reserves are the minimal amounts of cash that banks are required to keep on hand in case of unexpected demand.
  • Excess reserves are the additional cash that a bank keeps on hand and declines to lend out.
  • Bank reserves are kept to prevent the panic that can arise if customers discover that a bank doesn't have enough cash on hand to meet immediate demands.
  • Bank reserves may be kept in a vault on-site or sent to a bigger bank or a regional Federal Reserve bank facility.
  • Historically, the reserve rate for American banks has been set at zero to 10%.

How Bank Reserves Work

Bank reserves are primarily an antidote to panic. The Federal Reserve obliges banks to hold a certain amount of cash in reserve so that they never run short and have to refuse a customer's withdrawal, possibly triggering a bank run.

A central bank may also use bank reserve levels as a tool in monetary policy. It can lower the reserve requirement so that banks are free to make a number of new loans and increase economic activity. Or it can require that the banks increase their reserves to slow economic growth.

In recent years, the U.S. Federal Reserve and the central banks of other developed economies have turned to other tactics such as quantitative easing (QE) to achieve the same goals. The central banks in emerging nations such as China continue to rely on raising or lowering bank reserve levels to cool down or heat up their economies.

Required and Excess Bank Reserves

Bank reserves are termed either required reserves or excess reserves. The required reserve is the minimum cash the bank can keep on hand. The excess reserve is any cash over the required minimum that the bank is holding in its vault rather than lending out to businesses and consumers.

Banks have little incentive to maintain excess reserves because cash earns no return and may even lose value over time due to inflation. Thus, banks normally minimize their excess reserves, lending the money to clients rather than holding it in their vaults.

In good times, businesses and consumers borrow more and spend more. During recessions, they can't or won't take on additional debt. In downtimes, the banks may also toughen their lending requirements to avoid defaults.

Bank reserves decrease during periods of economic expansion and increase during recessions.

History of Bank Reserves

Despite the determined efforts of Alexander Hamilton, among others, the U.S. didn't have a national banking system for more than a couple of short periods of time until 1913, when the Federal Reserve System was created. (By 1863, the country at least had a national currency and a national bank chartering system.)

Until then, banks were chartered and regulated by states, with varying results. Bank collapses and "runs" on banks were common until a full-blown financial panic in 1907 led to calls for reform. The Federal Reserve System was created to oversee the nation's money supply.

Its role was significantly expanded in 1977 when, during a period of double-digit inflation, Congress defined price stability as a national policy goal and directed the Federal Open Market Committee (FOMC) within the Fed to carry it out.

Special Considerations

The required bank reserve follows a formula set by Federal Reserve Board regulations. The formula is based on the total amount deposited in the bank's net transaction accounts.

The figure includes demand deposits, automatic transfer accounts, and share draft accounts. Net transactions are calculated as the total amount in transaction accounts minus funds due from other banks, and minus cash that is in the process of being collected.

The required reserve ratio can also be used by a central bank as a tool to implement monetary policies. Through this ratio, a central bank can influence the amount of money available for borrowing.

Liquidity Coverage Ratio (LCR)

In addition to bank reserve requirements set by the Federal Reserve, banks must also follow liquidity requirements set by the Basel Accords. The Basel Accords are a series of banking regulations established by representatives from major global financial centers.

Required bank reserves are determined by the Federal Reserve for each bank based on its net transactions.

After the collapse of the U.S. investment bank Lehman Brothers in 2008, the Basel Accords were strengthened in an agreement known as Basel III. This required banks to maintain an appropriate liquidity coverage ratio (LCR). The LCR requires banks and other financial institutions to hold enough cash and liquid assets to cover fund outflows for 30 days.

In the event of a financial crisis, the LCR is designed to help banks keep from having to borrow money from the central bank. The LCR is intended to ensure banks have enough capital on hand to ride out any short-term capital disruptions. It's important to note that even when the Federal Reserve decreases bank reserve minimums, banks must still meet LCR requirements to ensure they have enough cash on hand to meet their short-term obligations.

Impact of the '08 Crisis

Until the financial crisis of 2008-2009, banks earned no interest for the cash reserves they held. That changed on Oct. 1, 2008. As part of the Emergency Economic Stabilization Act of 2008, the Federal Reserve began paying banks interest on their reserves. At the same time, the Fed cut interest rates in order to boost demand for loans and get the economy moving again.

The result defied the conventional wisdom that banks would rather lend money out than keep it in the vault. The banks took the cash injected by the Federal Reserve and kept it as excess reserves rather than lending it. They preferred to earn a small but risk-free interest rate over lending it out for a slightly higher but riskier return.

For this reason, the total amount of excess reserves spiked after 2008, despite an unchanged required reserve ratio.

How Much Money Do Banks Need to Keep in Reserve?

The reserve amount has historically ranged from zero to 10%. Since March 26, 2020, it has been zero.

Are Bank Reserves Assets or Liabilities?

A bank's reserves are considered part of its assets and are listed as such in its accounts and annual reports.

How Are Bank Reserves Calculated?

A bank's reserves are calculated by multiplying its total deposits by the reserve ratio. For example, if a bank's deposits total $500 million, and the required reserve is 10%, multiply 500 by 0.10. The bank's required minimum reserve is $50 million.

Where Do Banks Keep Their Reserves?

Some of it is stashed in a vault at the bank. Reserves also may be kept in the bank's account at one of the 12 regional Federal Reserve Banks. Some small banks keep part of their reserves at larger banks and tap into them as needed. This flow of cash between vaults peaks at certain times, like during holiday seasons when consumers withdraw extra cash. Once the demand subsides, the banks ship off some of their excess cash to the nearest Federal Reserve Bank.

The Bottom Line

The past banking system that existed in the U.S. before banks' regulation became centralized seems a bit Wild West by today's standards. Each state could charter banks, and small banks popped up and went under regularly. "Runs" on the banks were common.

That changed with the creation of the Federal Reserve System, and among the changes was a requirement that banks hold a minimum amount of cash in reserve to meet demand. Since March 2020, the reserve minimum has been zero, suggesting that the Federal Reserve is comfortable with the level of cash kept voluntarily by the nation's banks combined with the 30-day liquidity coverage ratio required by the Basel Accords.

I'm an expert in financial systems and banking regulations, having in-depth knowledge of the intricate workings of bank reserves and their historical context. My expertise extends to the role of central banks, particularly the U.S. Federal Reserve, in shaping and implementing policies related to bank reserves.

Now, let's delve into the concepts mentioned in the article about bank reserves:

1. Bank Reserves Basics:

  • Definition: Bank reserves are the minimum cash requirements that financial institutions must maintain to meet central bank standards.
  • Purpose: Ensure banks can meet unexpected large withdrawal demands.
  • Regulation in the U.S.: The Federal Reserve sets the reserve ratio, historically ranging from 0% to 10% of bank deposits.

2. Functionality of Bank Reserves:

  • Preventing Panic: Reserves act as an antidote to panic, preventing bank runs by ensuring banks never run short of cash.
  • Monetary Policy Tool: Central banks, including the Federal Reserve, may use reserve levels to implement monetary policies, either encouraging or restricting lending.

3. Types of Bank Reserves:

  • Required Reserves: The minimum cash banks must keep.
  • Excess Reserves: Additional cash banks hold beyond the required minimum, usually minimized due to lack of returns.

4. Historical Context:

  • Pre-Federal Reserve Era: Prior to 1913, the U.S. lacked a national banking system, leading to frequent bank collapses and runs.
  • Federal Reserve Creation: The Federal Reserve System was established in 1913 to oversee the nation's money supply.

5. Special Considerations:

  • Required Reserve Formula: Follows a formula based on net transaction accounts.
  • Liquidity Coverage Ratio (LCR): Basel Accords set liquidity requirements, strengthened after the 2008 crisis with Basel III.

6. Impact of the 2008 Crisis:

  • Interest on Reserves: Post-2008, the Federal Reserve started paying interest on reserves to boost demand for loans.
  • Excess Reserves: Despite unchanged required reserve ratio, banks preferred holding excess reserves with risk-free interest.

7. Reserve Management:

  • Calculation: Banks calculate reserves by multiplying total deposits by the reserve ratio.
  • Storage: Reserves may be kept in on-site vaults, regional Federal Reserve Banks, or larger banks.

8. Current Scenario:

  • Reserve Amount: Since March 26, 2020, the reserve minimum is zero.
  • Asset or Liability: Bank reserves are considered assets and listed as such in accounts and reports.

9. Conclusion:

  • Evolution: The banking system transitioned from a decentralized, Wild West era to the structured Federal Reserve system.
  • Current Dynamics: The reserve minimum being zero since 2020 indicates confidence in banks' voluntary cash levels and compliance with Basel Accords.

This comprehensive overview should provide a clear understanding of the concepts related to bank reserves discussed in the article. If you have any specific questions or need further clarification, feel free to ask.

Bank Reserves: Definition, Purpose, Types, and Requirements (2024)


Top Articles
Latest Posts
Article information

Author: Kieth Sipes

Last Updated:

Views: 6093

Rating: 4.7 / 5 (67 voted)

Reviews: 82% of readers found this page helpful

Author information

Name: Kieth Sipes

Birthday: 2001-04-14

Address: Suite 492 62479 Champlin Loop, South Catrice, MS 57271

Phone: +9663362133320

Job: District Sales Analyst

Hobby: Digital arts, Dance, Ghost hunting, Worldbuilding, Kayaking, Table tennis, 3D printing

Introduction: My name is Kieth Sipes, I am a zany, rich, courageous, powerful, faithful, jolly, excited person who loves writing and wants to share my knowledge and understanding with you.